Interior Decorating: Framing A Bathroom Mirror Diy

Introduction

When it comes to decorating your home, the bathroom is often overlooked. However, it is one of the most important rooms in the house, as it is where you start and end your day. One simple and affordable way to enhance the look of your bathroom is by framing your bathroom mirror. Not only does it add a decorative touch, but it also helps to protect the edges of the mirror from moisture damage. In this article, we will provide a step-by-step guide on how to frame your bathroom mirror DIY style.

Step 1: Measure Your Mirror

The first step in framing your bathroom mirror is to measure it. Use a tape measure to determine the length and width of your mirror. Be sure to measure both the horizontal and vertical sides, as some mirrors may be slightly uneven. Write down the measurements on a piece of paper so you can refer to them later.

Step 2: Choose Your Frame

Once you have your measurements, it's time to choose your frame. You can find pre-made frames at your local home improvement store, or you can make your own using wood or MDF (medium-density fiberboard). If you decide to make your own frame, be sure to choose a wood or MDF that is moisture-resistant, as it will be in a bathroom environment. You can also choose the color and style of your frame to match your existing bathroom decor.

Step 3: Cut Your Frame

Using your measurements from step 1, cut your frame to size. If you are using a pre-made frame, you can skip this step. If you are making your own frame, use a saw to cut the wood or MDF to the correct length and width. Be sure to wear protective eyewear and follow all safety precautions when using power tools.

Step 4: Sand Your Frame

After cutting your frame, use sandpaper to smooth out any rough edges. This will help ensure a snug fit around your mirror. If you are using a pre-made frame, you may need to sand it down slightly to fit your mirror.

Step 5: Prime Your Frame

If you are using a wood or MDF frame, you will need to prime it before painting or staining. This will help the paint or stain adhere better and prevent moisture damage. Use a brush or roller to apply a coat of primer to the entire frame, including the back and sides. Allow the primer to dry completely before moving on to the next step.

Step 6: Paint or Stain Your Frame

Once your primer is dry, you can paint or stain your frame. Use a brush or roller to apply the paint or stain in even strokes, being sure to cover the entire surface of the frame. Allow the paint or stain to dry completely before moving on to the next step.

Step 7: Attach Your Frame to the Mirror

Finally, it's time to attach your frame to the mirror. Apply a bead of silicone adhesive to the back of the frame, making sure to cover the entire perimeter. Carefully place the frame onto the mirror, making sure it is centered and level. Use masking tape to hold the frame in place while the adhesive dries. Allow the adhesive to dry completely before removing the tape.

Conclusion

Framing your bathroom mirror DIY style is a simple and affordable way to enhance the look of your bathroom. With just a few tools and materials, you can create a custom frame that matches your existing decor. By following the steps outlined in this article, you can create a beautiful and functional addition to your bathroom.